DataCard LM200 Guida Utente Scaricare il pdf (Pagina 78)

72 SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide

Printer error recovery

The printer’s LCD panel background color changes to red when the printer

has an error. The LCD panel displays text that describes the error.

Hopper jam

If a card jams in the card hopper section, “Jam (Hopper)” is displayed on the

LCD panel. To remove the jammed card:

1 Slide the card hopper latch open.

2 Slide the card cover up and remove any cards.

3 Try the following in the order presented:

a If you can reach the jammed card, pull it out.

b On the printer front panel, press the Reset key and then the

Return key. If possible, the printer moves the card and ejects it

from the reject card outlet.

c If the printer does not eject the card:

— Power off the

printer.

— Open the

printer door.

— Place a Jog

Dial on the

lower shaft of

the cleaning

unit.

— Turn the Jog

Dial clockwise

to move the card unit you can see it in the hopper.

— Remove the card, return the Jog Dial to the home location, and

close the printer.

4 Replace cards and the card cover.

5 Press the Reset, Next and then Return to initialize the printer.

Tips – Hopper jam

• Some internal parts may

be hot. Wear a glove

when reaching into the

printer.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 108 109

Nessun commento

DataCard LM200 Guida Utente Pagina 78