DataCard UltraGrafix Series Guida Utente Scaricare il pdf (Pagina 105)

ImageCard/UltraGrafix (Express and Select Classes) User’s Guide

B-3

Card requirements

Card stock for printing should meet the following requirements.

Size

: CR80, 3.375 in. (85.725 mm) x 2.125 in. (53.975 mm)

Type

: PVC with glossy surface or composite with glossy PVC surface

Thickness

•

0.020 in. (0.508 mm) to 0.050 in. (1.27 mm) plus or minus 10 percent,

for regular or magnetic stripe cards when the smart card module is

not installed

•

0.020 in. (0.508 mm) to 0.030 in. (0.762 mm) plus or minus 10 percent,

for all cards when a smart card module is installed

Card bow must be less than the thickness of the card (see Figure B:-1).

74030c10

Card bow must be less

than the thickness of

the card.

Figure B:-1 Card bow requirement

Printhead cartridge

There are three types of printhead cartridges. You can tell which type is in

your printer by looking for a sticker on the cartridge, as shown below:

ice0006

Printhead -- do not

touch this surface

A sticker on this surface

indicates the type of

printhead cartridge (see

table below).

Figure B:-2 Printhead cartridge

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 114 115

Nessun commento

DataCard UltraGrafix Series Guida Utente Pagina 105